LeHeng Instrument Technology Column Second Release: Comparison And Selection Suggestions For Single Point, S-Type, And Column Weighing Sensors

Nov 20, 2026 Leave a message

After the release of the first selection guide, Shandong LeHeng Instrument today launched the second in-depth article in its technical column - "Comparison of Single Point, S-type, and Column Weighing Sensors: Which One Should You Choose for Your Application? 》.

 

The article systematically compares the three most commonly used types of sensors in industrial weighing from four dimensions: load-bearing structure, installation method, anti eccentric load capacity, and typical scenarios, to help R&D engineers, system integrators, and project selection personnel match "structural selection" with real working conditions.

 

From the perspective of force structure, single point sensors adopt a cantilever structure with one end fixed and the other end loaded. When subjected to force, the beam body produces micro strain, which is suitable for situations such as platform scales and platform scales with biased loads; The S-type sensor is a dual-purpose structure for tension and compression, with both upper and lower ends subjected to force. It is commonly used in hook scales, tension measurement, and batching scales; Column sensors are designed to withstand axial pressure on a cylindrical body, with strong structural rigidity and wide range coverage. They are suitable for large-scale scenarios such as silos, reaction vessels, and truck scales.

 

From the perspective of installation and anti bias load capacity, single point sensors are easy to install and have a certain tolerance for platform bias load, but attention should be paid to the levelness of the installation foundation; S-type sensors have high requirements for neutral installation and are suitable for situations where the direction of tension or pressure is clear; Column sensors need to be used in conjunction with installation modules to eliminate lateral forces and bias errors through spherical or self-aligning structures, ensuring long-term stability over a large range.

 

From the perspective of typical applications, the article provides corresponding scenario suggestions: platform scales, weighing scales, and packaging lines should prioritize single point or single end beam structures; Hook scale, tension measurement, and ingredient weighing are suitable for S-shaped tension and compression sensors; Silos, hoppers, reaction vessels, and truck scales are more suitable for integrating column sensors with weighing modules. The article also reminds customers to avoid common selection errors such as "using a single point to weigh a large number of process silos" and "using column sensors to directly bear lateral forces".

 

From the perspective of LeHeng products, the company currently has single end beam sensors, S-shaped tension compression sensors, column sensors, and tower/modular weighing modules, which can cover the main applications of the three types of structures mentioned above. Customers can choose based on the range, accuracy level, protection level, and installation space combination, or the engineering team can provide one-on-one selection suggestions and customized solutions.

 

LeHeng Instrument was established in 2009, with two major production bases, over 200 employees, and more than ten R&D engineers. Its products are exported to more than 20 countries and it undertakes OEM/ODM customization. The technical column will be continuously updated in four directions: selection guidelines, vertical industry solutions, installation calibration and troubleshooting, and cutting-edge technology. Customers can read through the official website news page or contact the engineering team for selection support.

 

Contact Us


For global buyers seeking high-quality weighing sensors, please feel free to contact us at any time:

Phone number:+8618865029566 Whatsapp:+8618865029566 Email: qiudong.zhou@hotmail.com (Mr. Zhou)

If you have any purchasing needs, please contact us.

Send Inquiry

Send Inquiry